<< Click to Display Table of Contents >> Workstations Won't Open? |
|
So, Windows 10 updated over the weekend.
Now, Frazer will only open on one computer.
You're getting this box on every other computer.
These tricks should get things working for you again!
PART 1 :
On the computer that can open Frazer.
Open the Control Panel:
Click your right mouse button here. (on the window icon in the bottom left of your monitor.)
And then left-click on Search in the list that pops up
From there, type in "Control Panel" and then Click on "Control Panel" in the results at the top.
From there, you'll see one of 2 screens.
Either A Category View :
1. Click on Network and Internet
2. Then click on Network and Sharing Center. Continue to Part 2
Or You may see this Icon View instead:
Just click on Network and Sharing Center. Then Continue to Part 2.
PART 2:
The Network and Sharing Center.
Click on Change advanced sharing settings.
From here, you'll need to double check settings in 3 different categories:
A. Private Networks, B. Guest or Public Networks, and C. All Networks.
A. PRIVATE NETWORKS
Make sure that "Network discovery" and "File and printer sharing" are both turned "ON"
B. GUEST OR PUBLIC NETWORKS
Make sure that "Network discovery" and "File and printer sharing" are both turned "OFF"
C. ALL NETWORKS
Make sure that "Password protected sharing" is turned "OFF"
Now, Click Save Changes, to save these settings.
That's it! Go try to open Frazer on your other computers!
If they still aren't working, call Frazer at 888-963-5369.
OKIDATA WON'T PRINT? CLICK HERE!